PsiWallpaper ============ Version 1.0 -July 1999 Introduction ------------ This program, version 1.0, is written specifially for the Series 5mx. It is a small, but fun utility to change the wallpaper, displayed on the system screen, when you switch on you Psion. This will mean that you will never get bored with the same old picture or the EPOC logo! The wallpapers are at there best when your 5mx is in 16 Grey mode, more on that later. File Details ============ The zip file should contain the following files: READMEwallpaperSIS.txt (this file) PsiWallpaper.SIS (instalation file for PsiWallpaper) Pictures.sis (instalation file for my designed wallapers) 16GreysINI.sis (instalation file for 16 Grey scale mode) pscape.SIS (instalation file for shaired Palmscape files) INSTALLATION ------------ To install the program simply double-click on the PsiWallpaper.SIS file or select the "Install New Program" option in PSIWIN (EPOC Install). If you have the latest PSIWIN or EPOC Install then everything will happen automatically. If you don't have these then you need to get the installation file SETUP.EXE, which can be downloaded from PalmScape's Home Page. Then double-click on the Pscape.SIS to install the essential Pamscape shared files. Then double-click on the Pictures.SIS to install my specially designed wallpaper pictures. Remember, you can always create your own and can delete any of the ones supplied here - please reefer to your Psion Series 5mx handbook for information on how to do this (Sketch section). Then double-click on the 16GreysINI.SIS to install the special initialisation file. This file gives you a new system initialisation file for your Psion with an added line to put your Psion in 16 Grey Scale mode, rather then 4 Greys. This file is only read when the 5mx boots or is re-set, therefore it is essential that this is carried out with due care. First, it is recomended that you install this on a compact flash (disk D:), this way, if the Psion fails to re-start, you can just remove the card and try again then delete the file (System\Data\Wsini.ini). Once this file has been installed you will need to re-set your Psion to activate this. First ensure that all your data is backed up (preferabbly do this before you install 16GreysINI.sis, that way, if there is a problem it should not re-occur once the data has been restored) and that no programs are running, then and only then find the reset point (the little gold tab in the backup battery compartment), switch the Psion off and press it gently with a suitably thin object. Close the cover and then switch the Psion back on, after a few moments, you will see the 5mx screen and then the System screen will be displayed - allow about 30 seconds for this. All you will loose is the display settings on the System screen and some of the changes on the Extras Bar if you have customised the position of the program icons. I have carried out this process on my 5mx with no problems. You can also copy the SIS files directly to your Psion 5mx and double select them to launch the install program. RUNNING THE PROGRAM ------------------- Start the program by selecting the 'Extras' from the Application bar and then 'PsiWallpaper'. Enjoy! On-line help is provided and can be accessed from Help button. Disclaimer ========== Though every effort has been made to test this program and to ensure that there are no bugs, however, neither Palmscape or the author can accept any responsibility for any loss or damage caused by the use or miss use of this program. Comments and Suggestions ======================== If you have any comments on the program or suggestions for improvments and additions then please e-mail me at: DAVID@PALMSCAPE.COM. Though I may not be able to reply directly, your comments and suggestions will be taken into account. Continued development of other projects relies on your support and comment. Now have fun! More information on Palmscape ============================= Palmscape are the market leaders in shareware development for the Palmtop community. We have a wide range of products available for your favourite PDA. For more information visit us online at http://www.palmscape.com or contact our office at: 44 Harpur Street Bedford Bedfordshire MK40 2QT Tel/Fax: +44 (0)1234 353970 David Steer June 1999