PsiFS: Compatibility


Host Computer

PsiFS should work on any computer running RISC OS 3.1 or higher.

It has been successfully used on:

  • Acorn A410/1 fitted with RISC OS 3.1.
  • Acorn A4 fitted with RISC OS 3.1.
  • Acorn A5000 fitted with RISC OS 3.11.
  • Acorn RiscPC 600/700/J233 fitted with an ARM610/710/StrongARM and RISC OS 3.5/3.6/3.7.

Remote Computer

PsiFS should work with any computer running either SIBO (Psion Series 3/3a/3c/3mx, Psion Siena, Acorn PocketBook I/II or Xemplar PocketBook III) or EPOC (Psion Series 5, Geofox-One, Ericsson MC218, Ericsson R380, Philips Ilium Accent or Philips Synergy) connected via a serial link.

It has been successfully used with:

  • Psion Series 3a fitted with ROM version 3.40(F), 2MB RAM.
  • Psion Series 3c fitted with 2MB RAM.
  • Psion Series 3mx.
  • Acorn PocketBook II fitted with ROM version 1.20(F).
  • Psion Series 5 release 1 fitted with ROM version 1.00(113)/1.01(114)/1.01(145) and 8MB RAM.
  • Geofox-One fitted with 16MB RAM.

Serial Link

PsiFS should work over any serial link that can be used with PsiWin (Psion 3-Link, Acorn A-Link or a simple RS-232 serial cable for more recent machines).

It has been successfully used with the following cables:

  • Psion 3-Link cable (does not work unmodified on early RISC OS machines).
  • Acorn A-Link cable.
  • Psion Series 5 serial cable.
It has been successfully used with the following serial ports:
  • Internal serial port.
  • The Serial Port dual serial port card.
  • Atomwide triple serial port card.
Although it has not been tested, PsiFS should also work via an IrDa infrared link, if both machines are fitted with suitable interfaces.

[Contents] Copyright © Alexander Thoukydides, 1998, 1999